Drop-in decoder for Kato N Scale engines: ALCO PA1, E9A, E8/9A, P42 Genesis. 8 Function with Auto Adjusting Back EMF and built-in onboard resistor for an LED . 2 Onboard superbright, Golden White LED's, with long leads. 1 Amp motor drive 2 Amp peak. Note: Four of the functions (F1-F4) have onboard resistors for LEDS and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.
This decoder features onboard 680 ohm 1/4 watt resistors for LED's!
Dimensions: 2.53?x0.542?x0.155? or 64.26mm x 13.766mm x 3.937mm
Main Features of this Decoder
Back EMF Load Compensation for superior slow speed control even with heavy loads.
? Quiet Drive creates SUPER QUIET engine performance.
? Autodetect for realistic throttle response when using DC power.
? Dimmed Brightness of bulbs or LEDs is adjustable.
? Variable Momentum lets you make custom acceleration curves.
? Ditch Lights: control alternating ditch lights with realistic pulsing.
? Mars, Gyra, and Rotary Beacon are adjustable.
? Decoder Lock for programming same address decoders independently.
? Function Remapping: 13 buttons for most lights, 7 buttons for operations.
Other Features of This Decoder: This decoder has too many features that could be listed on this page. For the complete list of available features, print out the "Additional Programing Guide" that can be found in the literature section of our website ( www.tcsdcc.com). Some of the features include: Function Remapping, 3 Point Acceleration/Deceleration Curves, Button Control of the Motor, Loadable Speed Tables, Various lighting effects, decoder lock and many more
The free listing tool. List your items fast and easy and manage your active items.